you will have a happy result in 300-115 Engine - The current IT industry needs a reliable source of Cisco 300-115 Engine, Qualifications is just 300-115 Engine a stepping stone, Having 300-115 Engine certificate is the best for those people who want to be promoted and is also a valid selection, we will meet you all about 300-115 Engine IT certification, you need to constantly improve your professional ability and keep 300-115 Engine up with the pace of others to let you not fall far behind others, Our Cisco 300-115 Engine training materials contains questions and answers, we promise that provide high quality exam materials for you 300-115 Engine, 300-115 Engine the questions in the IT certification exam are also changing, 300-115 Engine is a site that provide the exam materials to the people who want to take the exam, Cisco 300-115 Engine is a major challenge in my life, and can achieve 300-115 Engine your dreams, which can ensure you a successful passing the Cisco 300-115 Engine

NO.1 An engineer is configuring VPLS BGP-based autodiscovery on a Cisco IOS XE PE router. Which
two configurations must be included for proper implementation? (Choose two.)
A. router bgp 61000 neighbor 172.16.10.2 remote-as 62000
B. router bgp 61000 address-family l2vpn vpls send-community-eBGP
C. l2vpn vfi context vpls1 autodiscovery bgp signaling ldp router bgp 61000 neighbor 172.16.10.2
remote-as 61000
D. router bgp 61000 address-family l2vpn vpls send-community extended
E. router bgp 61000 neighbor 172.16.10.2 remote-as 61000
F. l2vpn vfi context vpls1 autodiscovery bgp signaling ldp router bgp 61000 neighbor 172.16.10.2
remote-as 62000
Answer: D,E

642-889 original questions   

NO.2 Which type of VPN requires a full mesh of virtual circuits to provide optimal site-to-site
connectivity?
A. MPLS Layer 3 VPNs
B. GET VPNs
C. peer-to-peer VPNs
D. Layer 2 overlay VPNs
Answer: D

642-889 study guide   
Explanation:
http://etutorials.org/Networking/MPLS+VPN+Architectures/Part+2+MPLSbased+Virtual+Pri
vate+Networks/Chapter+7.+Virtual+Private+Network+VPN+Implementation+Options/Overl
ay+and+Peer-to-peer+VPN+Model/
Two VPN implementation models have gained widespread use: The overlay model, where the service
provider provides emulated leased lines to the customer. The service provider provides the customer
with a set of emulated leased lines. These leased lines are called VCs, which can be either constantly
available (PVCs) or established on demand (SVCs). The QoS guarantees in the overlay VPN model
usually are expressed in terms of bandwidth guaranteed on a certain VC (Committed Information
Rate or CIR) and maximum bandwidth available on a certain VC (Peak Information Rate or PIR). The
committed bandwidth guarantee usually is provided through the statistical nature of the Layer 2
service but depends on the overbooking strategy of the service provider The peer-to-peer model,
where the service provider and the customer exchange Layer 3 routing information and the provider
relays the data between the customer sites on the optimum path between the sites and without the
customer's involvement. The peer-to-peer VPN model was introduced a few years ago to alleviate the
drawbacks of the overlay VPN model. In the peer-to-peer model, the Provider Edge (PE) device is a
router (PE-router) that directly exchanges routing information with the CPE router. The Managed
Network service offered by many service providers, where the service provider also manages the CPE
devices, is not relevant to this discussion because it's only a repackaging of another service. The
Managed Network provider concurrently assumes the role of the VPN service provider (providing the
VPN infrastructure) and part of the VPN customer role (managing the CPE device).
The peer-to-peer model provides a number of advantages over the traditional overlay model: Routing
(from the customer's perspective) becomes exceedingly simple, as the customer router exchanges
routing information with only one (or a few) PE-router, whereas in the overlay VPN network, the
number of neighbor routers can grow to a large number. Routing between the customer sites is
always optimal, as the provider routers know the customer's network topology and can thus establish
optimum inter-site routing. Bandwidth provisioning is simpler because the customer has to specify
only the inbound and outbound bandwidths for each site (Committed Access Rate [CAR] and
Committed Delivery Rate [CDR]) and not the exact site-to-site traffic profile. The addition of a new
site is simpler because the service provider provisions only an additional site and changes the
configuration on the attached PE-router. Under the overlay VPN model, the service provider must
provision a whole set of VCs leading from that site to other sites of the customer VPN.
Prior to an MPLS-based VPN implementation, two implementation options existed for the peer-to-
peer VPN model: The shared-router approach, where several VPN customers share the same PE-
router. The dedicated-router approach, where each VPN customer has dedicated PE-routers. Overlay
VPN paradigm has a number of drawbacks, most significant of them being the need for the customer
to establish point-to-point links or virtual circuits between sites. The formula to calculate how many
point-to-point links or virtual circuits you need in the worst case is ((n)(n-1))/2, where n is the
number of sites you need to connect. For example, if you need to have full-mesh connectivity
between 4 sites, you will need a total of 6 point-topoint links or virtual circuits. To overcome this
drawback and provide the customer with optimum data transport across the Service Provider
backbone, the peer-to-peer VPN concept was introduced where the Service Provider actively
participates in the customer routing, accepting customer routes, transporting them across the Service
Provider backbone and finally propagating them to other customer sites.

It is our responsibility to relieve your pressure from preparation of 300-115 Exam Questions. To help you pass the 300-115 Exam Questions is our goal. The close to 100% passing rate of our dumps allow you to be rest assured in our products. Not all vendors dare to promise that if you fail the exam, we will give you a full refund. But our IT elite of DumpKiller and our customers who are satisfied with our 300-115 Exam Questions software give us the confidence to make such promise.

Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks (SWITCH v2.0)
One year free update, No help, Full refund!
300-115 Exam Questions Total Q&A: 191 Questions and Answers
Last Update: 2016-10-24

300-115 Dumps PDF Detail: 300-115 Exam Questions

Exam Code: 640-911
Exam Name: Introducing Cisco Data Center Networking
One year free update, No help, Full refund!
640-911 Test Questions Total Q&A: 210 Questions and Answers
Last Update: 2016-10-24

640-911 Practice Exam Detail: 640-911 Test Questions

Exam Code: 642-889
Exam Name: Implementing Cisco Service Provider Next-Generation Egde Network Services
One year free update, No help, Full refund!
642-889 Real Dumps Total Q&A: 126 Questions and Answers
Last Update: 2016-10-24

642-889 Practice Test Detail: 642-889 Real Dumps

If you buy DumpKiller Cisco 640-911 Test Questions, you will solve the problem of your test preparation. You will get the training materials which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success.

Before you decide to buy DumpKiller of Cisco 642-889 Real Dumps, you will have a free part of the questions and answers as a trial. So that you will know the quality of the DumpKiller of Cisco 642-889 Real Dumps. The Cisco 642-889 Real Dumps of DumpKiller is the best choice for you.

642-889 Free Demo Download: http://www.dumpkiller.com/642-889_braindumps.html